HP AIO 24-F0167C AIO PC US screen

A replacement touch screen compatible with the HP Other AIO 24-F0167C AIO PC US, in the 23.8" size class with a native resolution of 1920x1080, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops…

Brand for : HP
Model : AIO 24-F0167C AIO PC US · All parts for this model · All HP AIO 24-F models
Stock : In Stock
Available Stock : 2

Variation

Full HD

A$250.00In Stock

Specifications

Size	23.8"
Resolution	1920x1080
Refresh Rate	60Hz
Connector	30 pin

Price

A$250.00

Description

Specifications

Panel specifications

Refresh rate	60Hz
Screen size	23.8"
Resolution	1920x1080
Connector	30 pin

Before you order

Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine:

Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead.
Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original (this panel: 30 pin).
Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit.
Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP AIO 24-F0167C AIO PC US and we will check compatibility for you.

Quality and packaging

Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock.

Fitting

Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault.

Warranty, returns and delivery

Delivery: shipped Australia-wide with tracking.
Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.