Dell LATITUDE 3550 laptop screens & parts

A replacement laptop screen compatible with the Dell LATITUDE LATITUDE 15 3550 P170G (NEWER MODELS - AFTER 2020), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the Dell LATITUDE 15 3550 P170G (NEWER MODELS - AFTER 2020) range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your Dell LATITUDE 15 3550 P170G (NEWER MODELS - AFTER 2020) details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the Dell LATITUDE LATITUDE 15 3550 P38F (OLDER MODELS - BEFORE 2020), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the Dell LATITUDE 15 3550 P38F (OLDER MODELS - BEFORE 2020) range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your Dell LATITUDE 15 3550 P38F (OLDER MODELS - BEFORE 2020) details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement touch screen compatible with the Dell Other LATITUDE 15 3550 P170G (NEWER MODELS - AFTER 2020), in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Dell LATITUDE 15 3550 P170G (NEWER MODELS - AFTER 2020) and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: Out of Stock

A replacement touch screen compatible with the Dell Other LATITUDE 15 3550 P38F (OLDER MODELS - BEFORE 2020), in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Dell LATITUDE 15 3550 P38F (OLDER MODELS - BEFORE 2020) and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock