HP 14S-CR laptop screens & parts

A replacement housing panel compatible with the HP 14S-CR 14S-CR2000. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 14S-CR2000 and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR0011TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Black. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR0011TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Black

Stock: In Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1003TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Black. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1003TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Black

Stock: In Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1008TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Black. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1008TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Black

Stock: In Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR0012TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR0012TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR0012TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR0012TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR0013TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR0013TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR0014TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR0014TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR0016TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR0016TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR0025TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR0025TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1004TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1004TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1006TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1006TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1007TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1007TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1009TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1009TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1010TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1010TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1011TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1011TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1012TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1012TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1013TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1013TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1014TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1014TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR1015TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR1015TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2001TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2001TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2002TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2002TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2002TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2002TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2003TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2003TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2003TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2003TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2004TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2004TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2004TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2004TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2005TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2005TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2005TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2005TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2006TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2006TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2007TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2007TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2008TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2008TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR2010TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR2010TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR3001TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR3001TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR3001TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR3001TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR3002TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR3002TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR3003TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR3003TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement keyboard compatible with the HP 14S-CR 14S-CR3004TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14S-CR3004TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: Out of Stock

A replacement laptop screen compatible with the HP 14S 14S-CR0011TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR0011TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR0011TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR0012TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR0012TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR0012TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR0012TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR0012TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR0012TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR0013TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR0013TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR0013TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR0014TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR0014TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR0014TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR0016TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR0016TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR0016TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR0025TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR0025TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR0025TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1003TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1003TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1003TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1004TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1004TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1004TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1006TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1006TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1006TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1007TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1007TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1007TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1008TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1008TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1008TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1009TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1009TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1009TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1010TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1010TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1010TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1011TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1011TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1011TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1012TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1012TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1012TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1013TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1013TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1013TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1014TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1014TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1014TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR1015TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR1015TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR1015TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2001TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2001TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2001TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2002TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2002TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2002TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2002TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2002TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2002TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2003TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2003TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2003TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2003TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2003TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2003TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2004TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2004TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2004TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2004TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2004TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2004TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2005TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2005TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2005TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2005TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2005TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2005TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2006TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2006TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2006TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2007TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2007TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2007TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2008TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2008TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2008TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR2010TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR2010TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR2010TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR3001TU, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR3001TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR3001TU and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR3001TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR3001TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR3001TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR3002TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR3002TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR3002TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR3003TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR3003TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR3003TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A replacement laptop screen compatible with the HP 14S 14S-CR3004TX, supplied as the bare LCD panel with no touch layer. Laptop makers fit several different panels to the same model, so please treat this as a compatible panel for the HP 14S-CR3004TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications — compare the resolution, refresh rate, connector (pin count, and which side of the panel the socket sits), mounting style and surface finish with your existing screen. A sharper or faster panel is not a drop-in upgrade; the cable and connector usually differ. Variations — where this listing offers more than one option, choose the variation whose specifications line up with your original, not simply the cheapest. Images — the photos show the connector position and bracket layout of the panel supplied; check them against the back of your screen. Not sure? — send us the part number printed on the rear of your original panel together with your HP 14S-CR3004TX and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Screen replacement is one of the most common laptop repairs. With the machine powered off and the battery disconnected, the bezel unclips, the old panel unscrews and the cable swaps across to the new one. Work on a soft, static-free surface, hold the panel by its edges and never force the connector. If you would rather not open the lid yourself, any local repairer can fit a panel like this in well under an hour. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock