HP ENVY 14-EB laptop screens & parts

A complete touch screen assembly compatible with the HP ENVY 14-EB P/N M30901-001. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB P/N M30901-001, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB SERIES. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB SERIES, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0001TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0001TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0001TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0001TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0002TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0002TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0002TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0002TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0003TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0003TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0003TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0003TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0004TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0004TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0004TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0004TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0005TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0005TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0005TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0005TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0006TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0006TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0006TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0006TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0007TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0007TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0008CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0008CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0008TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0008TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0008TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0008TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0010CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0010CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0010NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0010NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0010TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0010TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0011TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0011TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0012TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0012TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0013TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0013TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0014TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0014TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0015TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0015TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0016TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0016TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0017TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0017TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0022TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0022TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0023TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0023TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0506TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0506TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0509TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0509TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0510TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0510TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0511TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0511TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0512TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0512TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0514TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0514TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0515TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0515TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0516TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0516TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP ENVY 14-EB0517TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-EB0517TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 14.0", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Brightness: 200nits, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A replacement laptop screen compatible with the HP ENVY 14-EB Series HP PN M30902-001, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB Series HP PN M30902-001 range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB Series HP PN M30902-001 details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-eb0000, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-eb0000 range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-eb0000 details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-EB0009TX, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB0009TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB0009TX details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-EB0018TX, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB0018TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB0018TX details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-EB0019TX, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB0019TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB0019TX details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-EB0020TX, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB0020TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB0020TX details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-EB0021TX, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB0021TX range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB0021TX details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-EB0047NR, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB0047NR range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB0047NR details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-EB0503TU, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB0503TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB0503TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-EB0504TU, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB0504TU range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB0504TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock

A replacement laptop screen compatible with the HP ENVY 14-EB1010CA, supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 14-EB1010CA range and run through the checks below before ordering. Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 14-EB1010CA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Stock: In Stock