Login
HP ENVY 15-ED laptop screens & parts
From 2020-2021, the HP Envy 15-ed sits in HP's premium consumer Envy line, 15.6-inch machines a step above the Pavilion in build and screen quality. Panel choice is the trap on this range: touch and non-touch displays were both sold, and full HD and 4K options appeared, so the screen originally fitted needs confirming before a replacement is ordered. For the Envy 15-ed the catalogue carries screens and touch assemblies alongside batteries, backlit keyboards, palmrests and top covers, hinges, fans, display cables and charging ports, spread across more than 300 model variants. The model table below is the surest way to match a part to the exact machine. Parts can be picked up from the Maidstone workshop in Melbourne, or the laptop can be dropped off there for repair.
HP ENVY 15-ED models
All HP families1. Pick your exact model to narrow the parts below to it.
309 models in this family
2. Choose your required part type
Showing 1–100 of 312 parts for the HP ENVY 15-ED family.
Can't find your part? Contact usTouch screen assembly for the HP ENVY 15-ED family100
HP ENVY X360 15-ED0012TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0012TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0012TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0013NA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0013NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0013NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0013TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0013TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0013TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0013TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0013TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0013TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0014NA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0014NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0014NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0014TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0014TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0014TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0014TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0014TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0014TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0015NA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0015NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0015NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0015TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0015TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0015TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0015TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0015TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0015TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0016NA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0016NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0016NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0016TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0016TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0016TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0016TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0016TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0016TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0017NA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0017NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0017NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0017TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0017TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0017TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0017TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0017TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0017TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0018TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0018TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0018TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0018TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0018TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0018TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0019TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0019TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0019TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0019TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0019TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0019TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0020CA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0020CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0020CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0020TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0020TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0020TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0020TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0020TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0020TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0021TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0021TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0021TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0021TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0021TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0021TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0022TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0022TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0022TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0022TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0022TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0022TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0023TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0023TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0023TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0024TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0024TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0024TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0025TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0025TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0025TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0026TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0026TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0026TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0027TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0027TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0027TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0028TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0028TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0028TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0029TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0029TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0029TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0030TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0030TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0030TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0031TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0031TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0031TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0032TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0032TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0032TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0033TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0033TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0033TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0034TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0034TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0034TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0035TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0035TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0035TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0036TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0036TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0036TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0037TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0037TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0037TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0038TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0038TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0038TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0039TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0039TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0039TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0040TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0040TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0040TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0041TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0041TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0041TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0042TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0042TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0042TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0047NR touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0047NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0047NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0503NA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0503NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0503NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED0504NA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED0504NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED0504NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1000 SERIES touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1000 SERIES. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1000 SERIES, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1000NA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1000NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1000NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1000SA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1000SA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1000SA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1001NA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1001NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1001NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1001SA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1001SA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1001SA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1001TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1001TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1001TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1001TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1001TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1001TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1002TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1002TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1002TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1002TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1002TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1002TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1003CA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1003CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1003CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1003TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1003TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1003TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1003TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1003TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1003TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1004TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1004TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1004TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1004TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1004TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1004TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1005TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1005TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1005TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1006TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1006TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1006TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1006TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1006TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1006TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1007TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1007TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1007TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1007TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1007TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1007TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1008CA touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1008CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1008CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1008TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1008TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1008TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1008TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1008TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1008TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1009TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1009TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1009TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1010NR touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1010NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1010NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1010TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1010TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1010TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1011TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1011TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1011TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1012TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1012TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1012TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1012TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1012TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1012TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1013TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1013TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1013TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1013TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1013TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1013TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1014TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1014TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1014TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1014TX touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1014TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1014TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1015TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1015TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1015TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1016TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1016TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1016TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1017TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1017TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1017TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1018TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1018TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1018TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1019TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1019TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1019TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1020TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1020TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1020TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1021TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1021TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1021TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1022TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1022TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1022TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1023TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1023TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1023TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1024TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1024TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1024TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1025TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1025TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1025TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1026TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1026TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1026TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1027TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1027TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1027TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1028TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1028TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1028TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1029TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1029TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1029TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1030TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1030TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1030TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1031NR touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1031NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1031NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
HP ENVY X360 15-ED1031TU touch screen assembly
A complete touch screen assembly compatible with the HP Other ENVY X360 15-ED1031TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch Ribbon) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-ED1031TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 1 Year Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.
Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch Ribbon, Surface: Glossy, Brightness: 220 cd/m² (Typ.), Additional: FHD, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.3 , 30 pins Connector, Warranty: 1 Year
Stock: Out of Stock
A$235.00
Copyright of One Ninety Six Pty Ltd – © 2026. All rights reserved. LAPTOPPANEL.COM.AU ABN 15 621 495 850