HP ENVY 15-EY laptop screens & parts

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0000 SERIES. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0000 SERIES, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0000AU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0000AU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0000CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0000CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0000CI. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0000CI, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0000NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0000NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0000SA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0000SA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0002SA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0002SA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0003CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0003CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0003CI. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0003CI, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0003NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0003NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0003SA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0003SA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0004CI. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0004CI, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0005CI. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0005CI, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0005NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0005NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0007NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0007NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0008CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0008CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0008CI. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0008CI, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0008NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0008NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0012CI. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0012CI, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0013DX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0013DX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0016AU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0016AU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0017CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0017CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0023DX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0023DX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0501NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0501NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0501SA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0501SA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0502NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0502NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0502SA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0502SA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0747NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0747NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY0797NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY0797NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY1000 SERIES. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY1000 SERIES, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY1010NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY1010NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY1057NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY1057NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other ENVY X360 15-EY1157NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (40 Pin Connector + Touch Ribbons) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP ENVY X360 15-EY1157NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 40 Pin Connector + Touch Ribbons, Surface: Glossy, Brightness: 250 cd/m² (Typ.), Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY X360 15-ey PN N09665-001. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 15-ey PN N09665-001, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY X360 15-EY Series. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 15-EY Series, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Envy x360 15-EY0000. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-EY0000, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Envy x360 15-EY0001NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-EY0001NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Envy x360 15-EY0004AU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-EY0004AU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Envy x360 15-EY0006AU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-EY0006AU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Envy x360 15-EY0007AU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-EY0007AU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Envy x360 15-EY0008AU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-EY0008AU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Envy x360 15-EY0017AU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-EY0017AU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Envy x360 15-EY0022AU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-EY0022AU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A complete touch screen assembly compatible with the HP Envy x360 15-ey1000 IDS. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) Bottom Right) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-ey1000 IDS, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) Bottom Right, Surface: Glossy/Matte dep. on stock, Brightness: 250 cd/m² (Typ.), Additional: FHD Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , HBR1 (2.7G/lane) , 30 pins Connector, Warranty: 12 Months

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY SERIES. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY SERIES and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0000AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0000AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0000CI. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0000CI and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0000NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0000NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0000SA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0000SA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0001NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0001NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0002SA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0002SA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0003CI. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0003CI and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0003NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0003NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0003SA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0003SA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0004CI. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0004CI and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0005CI. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0005CI and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0005NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0005NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0007NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0007NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0008CI. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0008CI and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0008NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0008NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0012CI. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0012CI and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0016AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0016AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0017CA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0017CA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0022AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0022AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0501NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0501NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0501SA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0501SA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0502NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0502NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 15-EY0502SA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0502SA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP Envy x360 15-EY0001NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0001NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP Envy x360 15-EY0004AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0004AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP Envy x360 15-EY0006AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0006AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP Envy x360 15-EY0007AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0007AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP Envy x360 15-EY0008AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0008AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP Envy x360 15-EY0017AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0017AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock

A replacement housing panel compatible with the HP Envy x360 15-EY0022AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Brown. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-EY0022AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6", Warranty: 3 Months, Colour: Brown

Stock: In Stock