HP PAVILION 11-N laptop screens & parts

A replacement laptop screen compatible with the HP PAVILION 11-N023TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N023TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N023TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N024TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N024TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N024TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N025TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N025TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N025TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N026TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N026TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N026TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N028TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N028TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N028TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N029TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N029TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N029TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N030CA, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N030CA range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N030CA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N030TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N030TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N030TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N031TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N031TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N031TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N032TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N032TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N032TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N033TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N033TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N033TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N034TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N034TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N034TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N035TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N035TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N035TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N036TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N036TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N036TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N038CA, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N038CA range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N038CA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N039TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N039TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N039TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N040CA, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N040CA range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N040CA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N041CA, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N041CA range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N041CA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N041TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N041TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N041TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N042TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N042TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N042TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N045TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N045TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N045TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N046TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N046TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N046TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N047TU, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N047TU range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N047TU details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N055NR, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N055NR range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N055NR details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N056NR, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N056NR range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N056NR details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N080NA, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N080NA range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N080NA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N083NA, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N083NA range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N083NA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N083SA, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N083SA range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N083SA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N084NA, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N084NA range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N084NA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement laptop screen compatible with the HP PAVILION 11-N084SA, in the 11.6" size class with a native resolution of WXGA (1366 x 768), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the HP 11-N084SA range and run through the checks below before ordering. Panel specifications Screen size 11.6" Resolution WXGA (1366 x 768) Backlight LED Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your HP 11-N084SA details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WXGA (1366 x 768), Size: 11.6"

Stock: In Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N102TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N102TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N103TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N103TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N106TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N106TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N107TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N107TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N108TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N108TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N109TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N109TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N110TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N110TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N111TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N111TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N112TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N112TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N113TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N113TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N114TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N114TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N115TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N115TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N116TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N116TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N117TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N117TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N118TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N118TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N119TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N119TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION 360 11-N120TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 360 11-N120TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N102TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N102TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N103TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N103TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N106TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N106TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N107TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N107TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N108TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N108TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N109TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N109TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N110TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N110TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N111TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N111TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N112TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N112TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N113TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N113TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N114TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N114TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N115TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N115TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N116TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N116TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N117TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N117TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N118TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N118TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N119TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N119TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP PAVILION X360 11-N120TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP X360 11-N120TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N001TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N001TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N002TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N002TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N003TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N003TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N004TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N004TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N005TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N005TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N006TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N006TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N007TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N007TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N008TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N008TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N009TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N009TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N010DX, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N010DX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N010TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N010TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N011DX, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N011DX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N011TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N011TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N012DX, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N012DX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N012TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N012TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N013TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N013TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N014TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N014TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N015TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N015TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N016TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N016TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N017TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N017TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N018TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N018TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N019TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N019TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N020TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N020TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N021TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N021TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N022TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N022TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N023TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N023TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N024TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N024TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N025TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N025TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N026TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N026TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N027TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N027TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N028TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N028TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N029TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N029TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N030CA, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N030CA, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N030TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N030TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N031TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N031TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 11-N032TU, in the 11.6" size class. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type (this digitizer: Ribbon Cables) with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 11-N032TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 11.6", Connector: Ribbon Cables, Warranty: 12 Months

Stock: Out of Stock