HP PAVILION 15-CW laptop screens & parts

A replacement touch screen compatible with the HP Other PAVILION 15-CW0030CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0030CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1000 SERIES, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1000 SERIES and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1001NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1001NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1004NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1004NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1018CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1018CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1598SA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1598SA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0000 SERIES, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0000 SERIES and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0010CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0010CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0010NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0010NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1017NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1017NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0013NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0013NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0017CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0017CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0020CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0020CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0024AU, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0024AU and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0040CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0040CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0060CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0060CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1007NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1007NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1016NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1016NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1017CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1017CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1018NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1018NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1021NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1021NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1033AU, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1033AU and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1095NR, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1095NR and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1507NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1507NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1XXX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1XXX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW0XXX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW0XXX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1011NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1011NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1012NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1012NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1013NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1013NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1014NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1014NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1500NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1500NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1500SA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1500SA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1507SA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1507SA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1511NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1511NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1511SA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1511SA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CW1598NA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CW1598NA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 15-CW 15-CS SERIES. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Top Lid Cover Light Mineral Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW 15-CS SERIES and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: Top Lid Cover Light Mineral Silver

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 15-CW SERIES. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Top Lid Cover Light Mineral Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW SERIES and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: Top Lid Cover Light Mineral Silver

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0000AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Top Lid Cover Light Mineral Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0000AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: Top Lid Cover Light Mineral Silver

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0000AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Top Lid Cover Light Mineral Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0000AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: Top Lid Cover Light Mineral Silver

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0001AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Top Lid Cover Light Mineral Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0001AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: Top Lid Cover Light Mineral Silver

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0001AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Top Lid Cover Light Mineral Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0001AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: Top Lid Cover Light Mineral Silver

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0002AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Top Lid Cover Light Mineral Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0002AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: Top Lid Cover Light Mineral Silver

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0002AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Top Lid Cover Light Mineral Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0002AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: Top Lid Cover Light Mineral Silver

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0000AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0000AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0000AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0000AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0001AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0001AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0001AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0001AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0002AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0002AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0002AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0002AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0003AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0003AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0003AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0003AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0004AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0004AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0004AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0004AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0005AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0005AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0005AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0005AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0006AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0006AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0006AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0006AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0007AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0007AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0007AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0007AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0007CA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0007CA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0008AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0008AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0008AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0008AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0009AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0009AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0010AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0010AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0011AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0011AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0012AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0012AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0013AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0013AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0014AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0014AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0016AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0016AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0017AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0017AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0018AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0018AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0019AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0019AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0020AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0020AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0021AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0021AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0021AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0021AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0022AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0022AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0023AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0023AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0024AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0024AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0025AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0025AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0026AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0026AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0026AX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0026AX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0027AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0027AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0028AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0028AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0029AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0029AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0055NR. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0055NR and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0061NR. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0061NR and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0062NR. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0062NR and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0075NR. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0075NR and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0085NR. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0085NR and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0088NR. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0088NR and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW0996NA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW0996NA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW1000AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW1000AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW1001AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW1001AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW1002AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW1002AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW1029AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW1029AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW1030AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW1030AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW1031AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW1031AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW1032AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW1032AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock

A replacement housing panel compatible with the HP PAVILION 15-CW1033AU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as LCD Bezel. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 15-CW1033AU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Warranty: 3 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 3 Months, Colour: LCD Bezel

Stock: Out of Stock