HP SPECTRE 12-C laptop screens & parts

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C Series PN 907565-001. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C Series PN 907565-001, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C001TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C001TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C002TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C002TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C003TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C003TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C004TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C004TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C005TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C005TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C006TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C006TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C007TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C007TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C008TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C008TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C009TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C009TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C010TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C010TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C011TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C011TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C012DX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C012DX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C012TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C012TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C013TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C013TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C014TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C014TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C015TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C015TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C016TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C016TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C017TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C017TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C018TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C018TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C019TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C019TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C020TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C020TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C021TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C021TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C022TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C022TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C023TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C023TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C024TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C024TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C025TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C025TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C026TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C026TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C027TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C027TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C028TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C028TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C029TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C029TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C030TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C030TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C031TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C031TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C032TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C032TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C052NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C052NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 12-C053NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 12-C053NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock

A complete touch screen assembly compatible with the HP SPECTRE X2 Detachable 12-c033TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 12.0" size class with a native resolution of 2k (3000 x 2000). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: 2k (3000 x 2000)), refresh rate and connectors (40 Pin (eDP) bottom right + Touch connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X2 Detachable 12-c033TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: 2k (3000 x 2000), Size: 12.0", Connector: 40 Pin (eDP) bottom right + Touch connector, Surface: Glossy, Brightness: 200nits, Additional: 2K Assembly, Refresh_rate: 60Hz, Signal_type: eDP (2 Lanes) , eDP1.2 , 30 pins Connector, Warranty: 12 Months

Stock: Out of Stock