logo

Acer E1-532P-2883 parts

Acer's Aspire E1-532P comes from the budget E1 line of the Windows 8 era, around 2013-2014, and the P in the name matters: it marks the touchscreen version of the plain E1-532, so the display assembly differs between the two and ordering for the wrong one means a return trip. These are 15.6-inch machines, most fitted with a 1366x768 panel behind the touch glass. For the E1-532P family the catalogue runs well past screens, with batteries, keyboards, palmrests and top covers, lids and bezels, hinges, display cables and DC charging jacks listed across the variants. Match the exact model in the table on this page before ordering. Parts can be picked up from the Maidstone workshop in Melbourne, or the laptop left there for repair.

Showing parts for the Acer E1-532P-2883. All Acer ASPIRE E1-532P models

Acer ASPIRE E1-532P models

All Acer families

1. Pick your exact model to narrow the parts below to it.

Your model: E1-532P-2883

2. Choose your required part type

Can't find your part? Contact us

Touch laptop screen for Acer E1-532P-28831

Acer Aspire E1-532P-2883 touch screen

Acer Aspire E1-532P-2883 touch screen

A replacement touch screen compatible with the Acer ASPIRE E1-532P-2883, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer E1-532P-2883 and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: Out of Stock

A$165.00