logo

Acer S5-371 N16C4 SERIES parts

Acer's Aspire S 13, sold from 2016 under the model code S5-371, is a slim 13.3-inch ultrabook aimed at buyers wanting low weight without a premium price. Most of the range shipped with a 1920x1080 IPS panel, but touch-enabled S5-371T machines sit alongside the standard non-touch models and the two screen types are not interchangeable, so the exact model number matters when ordering a display. A wide range of parts is carried for the S5-371 series: screens and touch assemblies, batteries, keyboards, palmrests and top covers, hinges, display cables, DC jacks, fans and trackpads. The model list on this page shows what suits each variant. Parts can be collected from the Maidstone workshop in Melbourne's inner west, or the machine can be left there for fitting and repair.

Showing parts for the Acer S5-371 N16C4 SERIES. All Acer ASPIRE S5-371 models

Acer ASPIRE S5-371 models

All Acer families

1. Pick your exact model to narrow the parts below to it.

2. Choose your required part type

Can't find your part? Contact us

Touch laptop screen for Acer S5-371 N16C4 SERIES1

ACER ASPIRE S5-371 N16C4 SERIES touch screen

ACER ASPIRE S5-371 N16C4 SERIES touch screen

A replacement touch screen compatible with the Acer ASPIRE S5-371 N16C4 SERIES, in the 13.3" size class with a native resolution of Full HD (1920 x 1080p), built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer S5-371 N16C4 SERIES and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 13.3", Touch_type: Embedded Touch

Stock: Out of Stock

A$189.00