logo

Acer 5 SF514-55T-55LJ parts

One of Acer's lightest laptops, the Swift 5 SF514-55T is a 14-inch thin-and-light sold from late 2020, built around Intel's 11th-generation Core processors with a touchscreen fitted as standard. Every variant uses a 1920x1080 touch display, and because the digitiser glass is part of that assembly, a cracked lid usually means replacing the whole unit rather than a bare panel. Take care not to confuse it with the near-identical SF514-55TA sibling, which shares the shell but not every internal part. Parts carried for the SF514-55T go well beyond screens: touch assemblies, batteries, keyboards and palmrests, lids and hinges, fans and charging ports are all listed for these machines, with the model table below showing what suits each variant. Parts can be picked up from the Maidstone workshop in Melbourne, or the laptop can be left there for repair.

Showing parts for the Acer 5 SF514-55T-55LJ. All Acer SF514-55T models

Acer SF514-55T models

All Acer families

1. Pick your exact model to narrow the parts below to it.

Your model: 5 SF514-55T-55LJ

2. Choose your required part type

Can't find your part? Contact us

Touch laptop screen for Acer 5 SF514-55T-55LJ1

Acer Swift 5 SF514-55T-55LJ touch screen

Acer Swift 5 SF514-55T-55LJ touch screen

A replacement touch screen compatible with the Acer SWIFT 5 SF514-55T-55LJ, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer 5 SF514-55T-55LJ and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A$179.00