Acer SFG14-71T laptop screens & parts

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T SERIES, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T SERIES and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-519L, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-519L and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-51MG, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-51MG and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-521G, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-521G and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-53BQ, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-53BQ and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-542R, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-542R and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-5511, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-5511 and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-55QB, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-55QB and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-58EN, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-58EN and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-70D9, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-70D9 and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-70HC, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-70HC and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-71C4, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-71C4 and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-71SZ, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-71SZ and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-728K, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-728K and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-72QV, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-72QV and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-77AS, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-77AS and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-77UX, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-77UX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-79ZM, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-79ZM and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock