Acer SWIFT GO SFG14-71T-72QV parts

Touchscreen versions of Acer's Swift Go 14, the slim 13th-generation Intel model sold from 2023, sit under the SFG14-71T code, with 18 variants in this family. The panel is the part to check before ordering: the range was offered with a 2880x1800 OLED alongside IPS touchscreens, and those assemblies are not interchangeable. For these machines a wide spread of parts is carried, from replacement screens and touch assemblies to batteries, keyboards and palmrests, hinges, fans and display cables, and the model list on this page shows what suits each exact variant. Parts can be collected from the Maidstone workshop in Melbourne, or the laptop can be left there for repair.

Showing parts for the Acer SWIFT GO SFG14-71T-72QV. All Acer SFG14-71T models

Acer SFG14-71T models

All Acer families

1. Pick your exact model to narrow the parts below to it.

Your model: SWIFT GO SFG14-71T-72QV

18 models in this family

Model	Also known as
SWIFT GO SFG14-71T SERIES	—
SWIFT GO SFG14-71T-519L	—
SWIFT GO SFG14-71T-51MG	—
SWIFT GO SFG14-71T-521G	—
SWIFT GO SFG14-71T-53BQ	—
SWIFT GO SFG14-71T-542R	—
SWIFT GO SFG14-71T-5511	—
SWIFT GO SFG14-71T-55QB	—
SWIFT GO SFG14-71T-58EN	—
SWIFT GO SFG14-71T-70D9	—
SWIFT GO SFG14-71T-70HC	—
SWIFT GO SFG14-71T-71C4	—
SWIFT GO SFG14-71T-71SZ	—
SWIFT GO SFG14-71T-728K	—
SWIFT GO SFG14-71T-72QV	—
SWIFT GO SFG14-71T-77AS	—
SWIFT GO SFG14-71T-77UX	—
SWIFT GO SFG14-71T-79ZM	—

2. Choose your required part type

Touch laptop screen1

Can't find your part? Contact us

Touch laptop screen for Acer SWIFT GO SFG14-71T-72QV1

Acer SWIFT GO SFG14-71T-72QV touch screen

A replacement touch screen compatible with the Acer Other SWIFT GO SFG14-71T-72QV, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer SWIFT GO SFG14-71T-72QV and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A$215.00