logo

Acer 5 PRO SF514-52TP-558Z parts

Few laptops of its era were lighter: the Acer Swift 5 SF514-52TP is a 14-inch thin-and-light from 2017-2018, built around a magnesium-lithium chassis and a Full HD touch display. That matters when ordering, because the near-identical Swift 5 generations that came before and after use different panels and housings, so the exact model number on the base of the machine is the thing to match. A wide range of parts is carried for these particular Swifts, including touch screen assemblies, batteries, keyboards, palmrests and top covers, hinges, display cables and DC jacks, and the model list on this page shows what suits each variant. Parts can be collected from the Maidstone workshop in Melbourne, or the machine can be left there for repair.

Showing parts for the Acer 5 PRO SF514-52TP-558Z. All Acer SWIFT SF514-52TP models

Acer SWIFT SF514-52TP models

All Acer families

1. Pick your exact model to narrow the parts below to it.

2. Choose your required part type

Can't find your part? Contact us

Touch laptop screen for Acer 5 PRO SF514-52TP-558Z1

Acer Swift 5 PRO SF514-52TP-558Z touch screen

Acer Swift 5 PRO SF514-52TP-558Z touch screen

A replacement touch screen compatible with the Acer SWIFT 5 PRO SF514-52TP-558Z, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer 5 PRO SF514-52TP-558Z and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A$179.00