logo

Acer TRAVELMATE P4 SPIN TMP414RN-54-TCO-56NR parts

Acer's TravelMate Spin P4 line covers its business convertibles, and the TMP414RN-54 is the 14-inch model from around 2022, with a 360-degree hinge and a touch panel. These machines shipped with 1920x1200 touch displays, and the screen is usually replaced as a full assembly rather than a bare panel. One caution: Acer also sold a non-convertible TravelMate P4 as the TMP414-54, which shares little with this version, so the exact model number on the base sticker matters. For the Spin P4 machines in this family, the parts carried run to touch screen assemblies, batteries, keyboards, palmrests and hinges, along with smaller internals such as fans, charging ports and display cables. The model list on this page shows what suits each variant. Parts can be collected from the Maidstone workshop in Melbourne, or the machine can be left there for repair.

Showing parts for the Acer TRAVELMATE P4 SPIN TMP414RN-54-TCO-56NR. All Acer TMP414RN-54 models

Acer TMP414RN-54 models

All Acer families

1. Pick your exact model to narrow the parts below to it.

Your model: TRAVELMATE P4 SPIN TMP414RN-54-TCO-56NR

2. Choose your required part type

Can't find your part? Contact us

Touch laptop screen for Acer TRAVELMATE P4 SPIN TMP414RN-54-TCO-56NR1

Acer TRAVELMATE P4 SPIN TMP414RN-54-TCO-56NR touch screen

Acer TRAVELMATE P4 SPIN TMP414RN-54-TCO-56NR touch screen

A replacement touch screen compatible with the Acer Other TRAVELMATE P4 SPIN TMP414RN-54-TCO-56NR, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer TRAVELMATE P4 SPIN TMP414RN-54-TCO-56NR and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A$215.00