Acer ASPIRE V15 V3-575T-57R3 parts

Acer's Aspire V3-575T is a 15.6-inch mainstream home laptop from around 2015-2016, the T denoting the touchscreen version of the V3-575 line, so these machines generally take a touch screen assembly rather than a bare panel. That matters when ordering, as parts for touch and non-touch V3-575 variants are not always interchangeable and the exact model number should be checked first. The range of parts carried for the Acer V3-575T covers touch screen assemblies, batteries, keyboards, palmrests and top covers, along with hinges, fans and DC jacks for the wear these machines tend to show. The model list on this page shows what suits each variant in the family. Parts can be picked up from the Maidstone workshop in Melbourne, or the laptop can be left there for repair.

Showing parts for the Acer ASPIRE V15 V3-575T-57R3. All Acer V3-575T models

Acer V3-575T models

All Acer families

1. Pick your exact model to narrow the parts below to it.

Your model: ASPIRE V15 V3-575T-57R3

7 models in this family

Model	Also known as
ASPIRE V15 V3-575T SERIES	—
ASPIRE V15 V3-575T SERIES	—
ASPIRE V15 V3-575T-51Q8	—
ASPIRE V15 V3-575T-53BP	—
ASPIRE V15 V3-575T-57R3	—
ASPIRE V15 V3-575T-7008	—
ASPIRE V15 V3-575T-71U5	—

2. Choose your required part type

Touch laptop screen1

Can't find your part? Contact us

Touch laptop screen for Acer ASPIRE V15 V3-575T-57R31

Acer ASPIRE V15 V3-575T-57R3 touch screen

A replacement touch screen compatible with the Acer Other ASPIRE V15 V3-575T-57R3, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your Acer ASPIRE V15 V3-575T-57R3 and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$149.00