Apple A2337 (M1, 2020) parts

A replacement laptop screen compatible with the Apple MacBook Air 13" A2337 (M1, 2020), in the 13.3" size class with a native resolution of WQXGA (2560 x 1600), supplied as the internal LCD panel with no bezels, lids or tape. Laptop brands fit several different panels to the same model, so please treat this as one compatible panel for the Apple A2337 (M1, 2020) range and run through the checks below before ordering. Panel specifications Screen size 13.3" Resolution WQXGA (2560 x 1600) Backlight LED Connector Display Board Before you order The model number alone is not enough to be sure of a screen. Two minutes comparing this listing with your original panel saves a return: Specifications : compare the resolution, refresh rate, connector (pin count, size, location. This panel: Display Board), mounting style and surface finish with your existing screen. A sharper or faster panel is not necessarily a guaranteed upgrade; the cable and connector often differ. Variations : where this listing offers more than one option, choose the variation that matches with your laptop, not simply the cheapest, as it may not be the right one. Images : the photos show the connector position and bracket locations (if any) of the panel supplied; check that they line up with your screen. Not sure? : send us the model number from the back of the screen along with your Apple A2337 (M1, 2020) details, serial numbers and any photos and we will confirm compatibility before you buy. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in specialised secure packaging to enable safe delivery. The panel you recieve may have a different part number to the original one, but will be fully compatible. Fitting Screen replacement is one of the most common laptop repairs. With the laptop powered off and the battery disconnected, the bezel unclips or is held in with screws, the old panel is removed by either unscrewing or removing tape and the cables get transferred across to the new one. Work on a soft, static-free environment, hold the panel by its edges and NEVER force the connector. Always connect the panel, then connect the battery/power and test the panel before fully installing. We also offer repairs both in-store or by sending us the laptop. Warranty, returns and delivery Delivery: shipped Australia-wide. Returns: if a part arrives not working or different to what was in your laptop, contact us first and we will help you get it sorted.

Backlight: LED, Resolution: WQXGA (2560 x 1600), Size: 13.3", Connector: Display Board

Stock: In Stock

A complete display assembly compatible with the Apple MacBook Air 13" A2337 (M1, 2020): LCD, glass, aluminium lid, hinges and — where fitted by Apple — the camera and antenna modules, supplied as one factory-assembled unit. This is the same way Apple services these machines: the display is replaced as a whole lid, not as a bare panel. Before you order A-number and year — turn your MacBook over: the model number (A1398, A2338 and so on) is engraved on the underside near the regulatory text. Apple reused A-numbers across years with assemblies that are not interchangeable, so also check your year under Apple menu → About This Mac and compare both with the compatible models and years listed in the title. Variations — this listing may offer more than one option, such as colour or condition (new, refurbished or used). Choose the variation that suits your machine. Images — compare the photos with your lid: colour, hinge style and the presence or absence of a logo cut-out all differ between generations. Unsure? — send us your serial number (also under About This Mac) and we will confirm which assembly is compatible before you buy. Fitting and warranty conditions MacBook display assemblies connect to the logic board through delicate ribbon and antenna cables, and on many models the hinge tension and cable routing take experience to get right. We strongly recommend having this assembly fitted by a professional repairer — please note the warranty terms on this part: Only if installed by professional - 6 month, return to base. Quality and packaging Every assembly is inspected before dispatch and shipped in rigid, double-walled packaging with the hinge side protected. Condition and any inclusions are as stated in the listing title. Returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Resolution: WQXGA (2560 × 1600), Size: 13.3", Connector: Controller board & ribbon, Surface: Glossy, Warranty: Only if installed by professional - 6 month, return to base

Stock: In Stock

A replacement battery compatible with the Apple MacBook Air 13" A2337 (M1, 2020), supplied new. If your machine shuts down early, reports a swollen or "service" battery, or only runs on mains power, a new battery is the fix — and on most modern laptops it is a straightforward one. Before you order Specifications — compare the voltage, capacity and battery part code printed on your original with this listing, and check the model label on the underside of your laptop against the models named in the title. Batteries are shaped for their series and do not carry across between them. Variations — where the listing offers more than one option (capacity or grade), choose the variation that corresponds to what your machine came with. Images — check the photos for the connector type and the outline of the battery; both need to correspond to your original. Unsure? — send us a photo of the label on your existing battery together with your Apple A2337 (M1, 2020) and we will confirm compatibility. Swollen battery? — stop using the laptop, do not press on the case or trackpad, and replace it promptly. A swollen battery only gets worse. Fitting and battery care Power off and unplug before opening the base. Disconnect the old battery's connector first, and reconnect the new one last. Give the new battery a full charge before its first run on battery power. Recycle the old one: in Australia, any B-cycle drop-off point (most major supermarkets have one) takes laptop batteries free of charge. Never put a lithium battery in the bin. Warranty, returns and delivery Warranty: 6 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 6 Months

Stock: In Stock

A replacement keyboard compatible with the Apple MacBook Air 13" A2337 (M1, 2020). Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your Apple A2337 (M1, 2020), and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 13.3", Warranty: 6 Months

Stock: In Stock

A replacement keyboard compatible with the Apple MacBook Air 13" A2337 (M1, 2020). Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your Apple A2337 (M1, 2020), and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 13.3", Warranty: 6 Months

Stock: In Stock

A replacement keyboard compatible with the Apple MacBook Air 13" A2337 (M1, 2020). Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your Apple A2337 (M1, 2020), and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 13.3", Warranty: 6 Months

Stock: In Stock

Surface: Glossy/Matte dep. on stock, More: Used - With Touch ID, Warranty: 6 Months

Stock: In Stock

A replacement internal part compatible with the Apple MacBook Air 13" A2337 (M1, 2020). The title states what this part is — a webcam module, hinge set, sensor board, bracket or similar small assembly — and the photos show the unit supplied. Before you order Specifications — small parts are shaped for their series. Compare the model label on the underside of your machine with the models in the title, and check any details the title gives, such as connector type or a note like "no program" where a board needs software pairing. Variations — where the listing offers more than one option (left and right hinges, for example, or different revisions), choose the variation that corresponds to the part you are replacing. Images — compare the photos with your part: connector position, cable length and mounting holes are what decide whether it fits. Unsure? — the part number printed on your original is the most reliable reference. Send it to us, or a photo of the part, with your Apple A2337 (M1, 2020) and we will confirm compatibility. Fitting These parts are fiddly rather than difficult: small connectors, short cables and screws that like to wander. Disconnect the battery first, work over a tray, and never fold a ribbon cable sharply. Warranty, returns and delivery Warranty: 6 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 6 Months

Stock: In Stock

A replacement internal part compatible with the Apple MacBook Air 13" A2337 (M1, 2020). The title states what this part is — a webcam module, hinge set, sensor board, bracket or similar small assembly — and the photos show the unit supplied. Before you order Specifications — small parts are shaped for their series. Compare the model label on the underside of your machine with the models in the title, and check any details the title gives, such as connector type or a note like "no program" where a board needs software pairing. Variations — where the listing offers more than one option (left and right hinges, for example, or different revisions), choose the variation that corresponds to the part you are replacing. Images — compare the photos with your part: connector position, cable length and mounting holes are what decide whether it fits. Unsure? — the part number printed on your original is the most reliable reference. Send it to us, or a photo of the part, with your Apple A2337 (M1, 2020) and we will confirm compatibility. Fitting These parts are fiddly rather than difficult: small connectors, short cables and screws that like to wander. Disconnect the battery first, work over a tray, and never fold a ribbon cable sharply. Warranty, returns and delivery Warranty: No Warranty Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: No Warranty

Stock: In Stock

A replacement internal part compatible with the Apple MacBook Air 13" A2337 (M1, 2020). The title states what this part is — a webcam module, hinge set, sensor board, bracket or similar small assembly — and the photos show the unit supplied. Before you order Specifications — small parts are shaped for their series. Compare the model label on the underside of your machine with the models in the title, and check any details the title gives, such as connector type or a note like "no program" where a board needs software pairing. Variations — where the listing offers more than one option (left and right hinges, for example, or different revisions), choose the variation that corresponds to the part you are replacing. Images — compare the photos with your part: connector position, cable length and mounting holes are what decide whether it fits. Unsure? — the part number printed on your original is the most reliable reference. Send it to us, or a photo of the part, with your Apple A2337 (M1, 2020) and we will confirm compatibility. Fitting These parts are fiddly rather than difficult: small connectors, short cables and screws that like to wander. Disconnect the battery first, work over a tray, and never fold a ribbon cable sharply. Warranty, returns and delivery Warranty: 6 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Resolution: WQXGA (2560 x 1600), Size: 13.3", Warranty: 6 Months

Stock: In Stock

A replacement trackpad module compatible with the Apple MacBook Air 13" A2337 (M1, 2020). The usual cure for a pad that has stopped clicking, tracks erratically or has cracked glass. Before you order Specifications — compare the size and outline of the pad, the connector type and whether the flex cable is included (the title says so; otherwise your existing cable transfers across). Variations — where more than one colour is offered, choose the variation that suits your palmrest; the trackpad is a visible part of the machine. Images — check the photos for the finish and the cable position, and compare them with your existing pad. Need help choosing? — send us a photo of your palmrest and your Apple A2337 (M1, 2020) and we will confirm the compatible option. Rule this out first — a swollen battery pressing from below causes many "failed" trackpads. If the pad sits proud of the case or clicks poorly along one edge, check the battery before ordering a trackpad. Fitting Trackpads mount beneath the palmrest on small screws, with a ribbon cable to the board. Alignment matters for an even click: seat the pad loosely, centre it in its cut-out, then tighten gradually while checking the click feel. Warranty, returns and delivery Warranty: 6 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Warranty: 6 Months

Stock: In Stock