ASUS ZENSCREEN TOUCH MB16AMT parts

A portable monitor rather than a laptop, the ASUS MB16 family covers the ZenScreen range of slim 15.6-inch 1920x1080 IPS panels that take signal and power over USB-C, sold from 2017 in variants such as the battery-equipped MB16AP. Touch and non-touch versions and several chassis revisions sit under the MB16 name, so confirming the exact model number before ordering a panel is essential. A wide spread of parts is carried for these monitors, including replacement screens and touch assemblies, display cables and ribbon flexes, housings and covers, internal boards and batteries for the models that have them; the model list on this page shows what suits each variant. Parts can be picked up from the workshop in Maidstone, Melbourne, or the monitor can be left there for repair.

Showing parts for the ASUS ZENSCREEN TOUCH MB16AMT. All ASUS MB16 (MB16AP) models

ASUS MB16 (MB16AP) models

All ASUS families

1. Pick your exact model to narrow the parts below to it.

Your model: ZENSCREEN TOUCH MB16AMT

10 models in this family

Model	Also known as
ZENSCREEN GO MB16AHP	—
ZENSCREEN GO MB16AP	—
ZENSCREEN MB16AC	—
ZENSCREEN MB16ACE	—
ZENSCREEN MB16ACM	—
ZENSCREEN MB16ACV	—
ZENSCREEN MB16AH	—
ZENSCREEN MB16AHP	—
ZENSCREEN MB16AWP	—
ZENSCREEN TOUCH MB16AMT	—

2. Choose your required part type

Touch laptop screen1

Can't find your part? Contact us

Touch laptop screen for ASUS ZENSCREEN TOUCH MB16AMT1

ASUS ZENSCREEN TOUCH MB16AMT touch screen

A replacement touch screen compatible with the ASUS Other ZENSCREEN TOUCH MB16AMT, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your ASUS ZENSCREEN TOUCH MB16AMT and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00