logo

HP 15-AC120NR parts

Among HP's biggest-selling budget laptops of 2015 and 2016, the 15-AC series pairs a 15.6-inch screen with everything from a Celeron up to a Core i7. Most of these machines shipped with a 1366x768 panel, but 1920x1080 versions and touch-screen variants were sold alongside them, so the resolution of the old panel should be confirmed before a replacement is ordered. Parts coverage for the 15-AC family runs well beyond screens, with batteries, keyboards, palmrests and top covers, base housings, hinges, DC charging jacks and cooling fans all carried for these machines. With 657 variants in the family, the model list on this page is the place to match the exact machine before ordering. Parts can be collected from the workshop in Maidstone in Melbourne's inner west, or the laptop left there for fitting and repair.

Showing parts for the HP 15-AC120NR. All HP 15-AC models

HP 15-AC models

All HP families

1. Pick your exact model to narrow the parts below to it.

Your model: 15-AC120NR

2. Choose your required part type

Can't find your part? Contact us

Touch laptop screen for HP 15-AC120NR1

HP 15-AC120NR touch screen

HP 15-AC120NR touch screen

A replacement touch screen compatible with the HP Other 15-AC120NR, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP 15-AC120NR and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$149.00