HP 15 15Z-DB000 parts

Budget 15.6-inch consumer laptops built on AMD hardware, the HP 15z-db models were sold from around 2018 to 2020 through HP's online store as the configure-to-order counterpart to the HP 15-db, with the Intel-based 15-da looking near-identical. Because they were built to order, both 1366x768 and 1920x1080 panels appear across the range, in touch and non-touch form, so the exact model number should be checked before a screen is ordered. Parts for the HP 15z-db run well beyond displays, with batteries, keyboards, palmrests and top covers, lids and bezels, hinges, fans and DC charging jacks held across all six variants in the family. The model list on this page shows what suits each one. Parts can be collected from the workshop in Maidstone, Melbourne, or the machine can be left there for repair.

Showing parts for the HP 15 15Z-DB000. All HP 15Z-DB models

HP 15Z-DB models

All HP families

1. Pick your exact model to narrow the parts below to it.

Your model: 15 15Z-DB000

Model	Also known as
15 15Z-DB000	—
15 15Z-DB100	—
15Z-DB000	—
15Z-DB000	—
15Z-DB100	—
15Z-DB100	—

2. Choose your required part type

Touch laptop screen1

Can't find your part? Contact us

Touch laptop screen for HP 15 15Z-DB0001

HP 15 15Z-DB000 touch screen

A replacement touch screen compatible with the HP Other 15 15Z-DB000, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP 15 15Z-DB000 and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$149.00