logo

HP 14-DB0008CA parts

One of the first Chromebooks to run on AMD processors rather than Intel, the HP Chromebook 14-db series was sold from 2019 as a low-cost 14-inch machine pitched at home and classroom use. The screens fitted vary across the range: base variants carry a 1366x768 panel while others step up to 1920x1080, and touch versions exist as well, so confirm the exact model before ordering a display. A wide range of parts is carried for the 14-db machines, including screens and touch screen assemblies, keyboards and palmrests (the keyboard is built into the top cover on these), batteries, hinges and USB-C charging ports. Match the model number on the underside of the laptop against the list on this page to see what suits your variant. Parts can be collected from the Maidstone workshop in Melbourne, or the Chromebook can be left there for repair.

Showing parts for the HP 14-DB0008CA. All HP CHROMEBOOK 14-DB models

HP CHROMEBOOK 14-DB models

All HP families

1. Pick your exact model to narrow the parts below to it.

2. Choose your required part type

Can't find your part? Contact us

Touch laptop screen for HP 14-DB0008CA1

HP Chromebook 14-DB0008CA touch screen

HP Chromebook 14-DB0008CA touch screen

A replacement touch screen compatible with the HP CHROMEBOOK 14-DB0008CA, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP 14-DB0008CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: Out of Stock

A$129.00