HP ENVY 13-BA laptop screens & parts

A replacement battery compatible with the HP ENVY 13-BA SERIES, supplied new. If your machine shuts down early, reports a swollen or "service" battery, or only runs on mains power, a new battery is the fix — and on most modern laptops it is a straightforward one. Before you order Specifications — compare the voltage, capacity and battery part code printed on your original with this listing, and check the model label on the underside of your laptop against the models named in the title. Batteries are shaped for their series and do not carry across between them. Variations — where the listing offers more than one option (capacity or grade), choose the variation that corresponds to what your machine came with. Images — check the photos for the connector type and the outline of the battery; both need to correspond to your original. Unsure? — send us a photo of the label on your existing battery together with your HP 13-BA SERIES and we will confirm compatibility. Swollen battery? — stop using the laptop, do not press on the case or trackpad, and replace it promptly. A swollen battery only gets worse. Fitting and battery care Power off and unplug before opening the base. Disconnect the old battery's connector first, and reconnect the new one last. Give the new battery a full charge before its first run on battery power. Recycle the old one: in Australia, any B-cycle drop-off point (most major supermarkets have one) takes laptop batteries free of charge. Never put a lithium battery in the bin. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Battery

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1790TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1790TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1504TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1504TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1504TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1504TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1505TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1505TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1505TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1505TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1506TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1506TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1506TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1506TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1507TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1507TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1509TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1509TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1510TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1510TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1511TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1511TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1511TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1511TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1512TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1512TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1514TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1514TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1516TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1516TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1516TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1516TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1517TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1517TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1518TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1518TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1519TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1519TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1532TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1532TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1533TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1533TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0052TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0052TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0053TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0053TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0054TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0054TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0054TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0054TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0056TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0056TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0057TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0057TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0057TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0057TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0058TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0058TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0059TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0059TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0061TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0061TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0062TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0062TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0062TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0062TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0063TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0063TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0065TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0065TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0066TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0066TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0067TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0067TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0069TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0069TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0070TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0070TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0072TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0072TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1016TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1016TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1016TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1016TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1017TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1017TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1018TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1018TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1018TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1018TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA1019TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA1019TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0015TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0015TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0016TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0016TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0016TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0016TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0028TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0028TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0029TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0029TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0029TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0029TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0030CA. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0030CA and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0030TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0030TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0030TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0030TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0031TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0031TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0031TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0031TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0032TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0032TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0032TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0032TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0033TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0033TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0001CA: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0001CA, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0003TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0003TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0004TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0004TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0005TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0005TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0015TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0015TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0016TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0016TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0017TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0017TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0017TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0017TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0070TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0070TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0071TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0071TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0077TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0077TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0078TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0078TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0079TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0079TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0082TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0082TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0085NR: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0085NR, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0101TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0101TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0001TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0001TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0001TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0001TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0003TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0003TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0005TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0005TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0006TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0006TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0006TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0006TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0010TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0010TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0011TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0011TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0014TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0014TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0018TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0018TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0019TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0019TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0020TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0020TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0038TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0038TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0039TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0039TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0041TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0041TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0042TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0042TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0052TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0052TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0053TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0053TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0054TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0054TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0058TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0058TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0067TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0067TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0068TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0068TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0069TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0069TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock