HP ENVY 13-BA laptop screens & parts

A replacement housing panel compatible with the HP ENVY 13-BA0033TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0033TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0034TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0034TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0034TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0034TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0035TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0035TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0035TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0035TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0036TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0036TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0036TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0036TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0037TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0037TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0037TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0037TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0038TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0038TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0038TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0038TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0039TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0039TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0039TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0039TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0040TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0040TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0040TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0040TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0041TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0041TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0041TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0041TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0042TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0042TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0043TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0043TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0048TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0048TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0049TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0049TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0050TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0050TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0050TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0050TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement housing panel compatible with the HP ENVY 13-BA0052TU. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine — this one is listed as Silver. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 13-BA0052TU and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1005TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1005TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1010TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1010TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1023TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1023TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1024TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1024TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1025TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1025TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1026TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1026TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1027TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1027TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1030TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1030TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1033TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1033TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1034TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1034TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1036TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1036TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1041TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1041TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1042TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1042TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1044TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1044TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1045TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1045TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1501TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1501TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1503TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1503TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1504TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1504TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1505TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1505TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1506TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1506TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1522TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1522TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver, Variant: Refurbished

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1088CA: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1088CA, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1520TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1520TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1521TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1521TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1521TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1521TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1522TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1522TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1522TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1522TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1523TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1523TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1527TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1527TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1528TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1528TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1529TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1529TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1530TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1530TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1531TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1531TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1532TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1532TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1533TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1533TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1540TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1540TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1544TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1544TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1545TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1545TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0063TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0063TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0064TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0064TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0067TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0067TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0068TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0068TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0069TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0069TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0070TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0070TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0071TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0071TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0072TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0072TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0073TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0073TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0074TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0074TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0083TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0083TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0084TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0084TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0085TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0085TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0086TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0086TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0087TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0087TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0088TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0088TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0089TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0089TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0090TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0090TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1007TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1007TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1010TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1010TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1011TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1011TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1015TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1015TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1019TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1019TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1021TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1021TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1021TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1021TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1023TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1023TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1026TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1026TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1042TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1042TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1044TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1044TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1045TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1045TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1046TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1046TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1047TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1047TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1049TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1049TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1050CA: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1050CA, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1050TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1050TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1051TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1051TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1052TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1052TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1500TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1500TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock