HP ENVY 13-BA laptop screens & parts

A complete touch screen assembly compatible with the HP ENVY 13-BA1045TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1045TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1046TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1046TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1047TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1047TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1049TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1049TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1050CA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1050CA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1050TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1050TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1051TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1051TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1052TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1052TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1500TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1500TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA1543TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA1543TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY X360 13-BA P/N L96796-001. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 13-BA P/N L96796-001, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY X360 13-BA P/N L96797-001. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 13-BA P/N L96797-001, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY X360 13-BA P/N L96798-001. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 13-BA P/N L96798-001, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA P/N L96781-001. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA P/N L96781-001, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0002TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0002TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0010NR. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0010NR, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0050TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0050TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0052TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0052TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0054TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0054TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0056TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0056TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0057TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0057TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0057TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0057TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0058TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0058TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0059TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0059TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0062TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0062TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0063TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0063TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0074TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0074TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0075TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0075TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A complete touch screen assembly compatible with the HP ENVY 13-BA0075TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 13.3" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connectors) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 13-BA0075TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Connector: 30pin (eDP) + Touch Connectors, Surface: Glossy, Refresh_rate: 60Hz

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA SERIES. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA SERIES, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0003TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0003TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0006TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0006TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0007TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0007TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0010TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0010TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0011TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0011TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0013TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0013TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0014TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0014TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0015TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0015TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0016TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0016TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0017TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0017TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0018TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0018TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0019TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0019TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0020TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0020TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0021TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0021TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0022TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0022TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0023TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0023TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0024TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0024TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0029TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0029TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0030TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0030TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0031TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0031TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0032TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0032TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0042TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0042TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0043TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0043TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0050TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0050TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0052TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0052TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0054TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0054TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0057TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0057TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0058TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0058TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0061TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0061TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0062TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0062TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0065TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0065TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0067TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0067TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0069TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0069TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0074TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0074TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0075TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0075TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0077TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0077TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0078TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0078TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0082TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0082TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA0085NR. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA0085NR, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1003TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1003TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1004TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1004TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1005TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1005TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1010TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1010TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1016TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1016TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1021TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1021TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1022TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1022TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1023TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1023TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1024TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1024TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1025TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1025TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1026TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1026TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1027TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1027TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1030TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1030TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1033TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1033TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1034TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1034TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1036TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1036TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1041TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1041TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1042TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1042TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1044TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1044TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1045TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1045TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1501TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1501TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1503TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1503TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1504TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1504TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1505TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1505TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1506TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1506TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1509TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1509TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1511TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1511TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1518TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1518TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1520TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1520TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1521TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1521TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock

A replacement keyboard compatible with the HP ENVY 13-BA1522TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 13-BA1522TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Warranty: 6 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Size: 13.3", Warranty: 6 months

Stock: In Stock