HP 15-DS0038AU parts

A 2019 and 2020 release, the HP Envy x360 15-ds is the AMD Ryzen side of HP's 15.6-inch convertible line, sold alongside the Intel-based 15-dr, with a 360-degree hinge and a touchscreen on every variant. That last point matters when ordering: the glass, digitiser and 1920x1080 panel form a bonded assembly, so a cracked screen means replacing the whole touch unit rather than a bare panel. The parts range for the Envy x360 15-ds goes well past screens, covering batteries, keyboards, palmrests and top covers, hinges, display cables and charging ports across the ds variants. The model list below shows what suits each specific machine, as revisions differ across the run and parts do not necessarily interchange with the 15-dr. Pickup is available from the Maidstone workshop in Melbourne, or the laptop can be left there for the repair.

Showing parts for the HP 15-DS0038AU. All HP ENVY X360 15-DS models

HP ENVY X360 15-DS models

All HP families

1. Pick your exact model to narrow the parts below to it.

Your model: 15-DS0038AU · 7RA24PA

50 models in this family

Model	Also known as
15-DS0000AU	6RD22PA
15-DS0001AU	6RD23PA
15-DS0002AU	6RH26PA
15-DS0003AU	6SH27PA
15-DS0003CA	6GJ06UA, 6GJ06UAR
15-DS0004AU	6SH21PA, 6SH21PAR
15-DS0005AU	6SH22PA
15-DS0006AU	6SH32PA
15-DS0007AU	6SH24PA
15-DS0008AU	6SK70PA
15-DS0009AU	6SH38PA
15-DS0010AU	6SH15PA
15-DS0011AU	6SH16PA
15-DS0012AU	6SK86PA
15-DS0013AU	6SH10PA
15-DS0013CA	6GJ07UA, 6GJ07UAR
15-DS0013NR	7AH62UA, 7AH62UAR
15-DS0014AU	6SH23PA
15-DS0015AU	6SH57PA
15-DS0016AU	6SH25PA
15-DS0017AU	6SJ41PA
15-DS0018AU	6SK71PA
15-DS0019AU	6SH31PA
15-DS0020AU	6SH17PA
15-DS0021AU	6YN82PA
15-DS0022AU	6YN49PA
15-DS0023AU	6YN60PA
15-DS0024AU	6YS58PA
15-DS0025AU	6YN67PA
15-DS0026AU	6YN74PA
15-DS0027AU	6YN77PA
15-DS0028AU	6YN48PA
15-DS0029AU	6YN58PA
15-DS0030AU	6YN64PA
15-DS0031AU	6YN71PA
15-DS0032AU	6YN76PA
15-DS0033AU	6YS61PA
15-DS0034AU	6YN50PA
15-DS0035AU	6YN55PA
15-DS0036AU	7QG84PA
15-DS0037AU	7RA19PA
15-DS0038AU	7RA24PA
15-DS0039AU	7RA20PA
15-DS0040AU	7RA27PA
15-DS0041AU	8LA47PA
15-DS0042AU	9WM88PA
15-DS0043AU	9WM83PA
15-DS0044AU	9WP85PA
15-DS0XXX	7QX93U8R, 9ZC50U8R, 9ZC51U8R, 9ZC68U8R, 9ZC69U8R
X360 15-DS SERIES	—

2. Choose your required part type

Touch screen assembly1

Can't find your part? Contact us

Touch screen assembly for HP 15-DS0038AU1

HP Envy x360 15-DS0038AU touch screen assembly

A complete touch screen assembly compatible with the HP Envy x360 15-DS0038AU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 15.6" size class with a native resolution of Full HD (1920 x 1080p). Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution (this assembly: Full HD (1920 x 1080p)), refresh rate and connectors (30 Pin (eDP) bottom right + Touch) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP 15-DS0038AU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 Months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Backlight: LED, Resolution: Full HD (1920 x 1080p), Size: 15.6", Connector: 30 Pin (eDP) bottom right + Touch, Surface: Glossy, Additional: FHD Assembly, Signal_type: Black Bezel, Warranty: 12 Months

Stock: In Stock

A$255.00