HP PAVILION 14-CD laptop screens & parts

A replacement housing panel compatible with the HP Pavilion x360 14-CD1044TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 14-CD1044TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover

Stock: In Stock

A replacement housing panel compatible with the HP Pavilion x360 14-CD1053TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 14-CD1053TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover

Stock: In Stock

A replacement housing panel compatible with the HP Pavilion x360 14-CD1054TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 14-CD1054TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover

Stock: In Stock

A replacement housing panel compatible with the HP Pavilion x360 14-CD1058TX. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 14-CD1058TX and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover

Stock: In Stock

A replacement housing panel compatible with the HP PAVILION 14-CD SERIES. Laptop cases are lettered from the lid down, and the title tells you which panel this is: A cover — the outer lid behind the screen B cover — the bezel that frames the screen C cover — the palmrest and keyboard surround D cover — the base panel underneath Before you order Specifications — some lids and bezels differ between the touch and non-touch, or HD and Full HD, builds of the same model, and port cut-outs, vent patterns and hinge shapes can shift between revisions. Where the title carries a note like "for HD screens", compare it with your configuration. Variations — where more than one colour or cover type is offered, pick the variation that suits your machine. Manufacturers use several close shades of silver and grey across a range, so check in good light. Images — compare the photos with your existing panel: cut-outs, screw positions and the finish are the details that matter. Can't tell the shade or revision? — send us a photo of your panel and your HP 14-CD SERIES and we will help you pick the compatible one. Fitting Housing swaps are mostly patient disassembly: the old panel comes off, hinges, boards or rubber feet transfer across, and the new panel clips home. Keep screws sorted by location — lengths differ, and a long screw in a short hole will mark the outer surface of the case. Quality and packaging Housing panels are inspected before dispatch and shipped in rigid packaging with the finished surfaces protected. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover

Stock: In Stock

A replacement keyboard compatible with the HP Pavilion x360 14-CD0048TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14-CD0048TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement keyboard compatible with the HP Pavilion x360 14-CD0048TX. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14-CD0048TX, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement keyboard compatible with the HP Pavilion x360 14-CD0054TU. Depending on how the manufacturer builds this machine, it is supplied either as the bare keyboard or as the complete top case (palmrest) with the keyboard pre-fitted — the listing title states which, and this one is listed as Silver. Before you order Specifications — compare the layout (the shape of the Enter key and the bottom row are the quickest tell), backlighting and colour with your existing keyboard. Backlit and non-backlit keyboards are different parts with different cables. Variations — where the listing offers options such as backlit or non-backlit, or different colours, choose the variation that suits your machine rather than assuming they interchange. Images — check the photos against your keyboard's key shapes, the cable position underneath and, for a full top case, the port cut-outs along the sides. Not sure which one you have? — send us a photo of your keyboard and the model label from the underside of your HP 14-CD0054TU, and we will confirm compatibility. Fitting A complete top-case keyboard is the easier repair: your machine's internals move across into the new palmrest, and every keycap and the flex cable are already in place. A bare keyboard swap varies by model — on some machines it releases with a few clips and screws, on others it sits beneath the motherboard. Check a teardown for your series before choosing the bare-keyboard route, or have a repairer fit it. Once the mechanism under a key is broken, the keyboard cannot be repaired one keycap at a time; replacing it is the lasting fix. Quality and packaging Keyboards are supplied new, inspected before dispatch and shipped in rigid protective packaging. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Housing/Cover, Colour: Silver

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0061TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0061TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0061TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0061TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0062TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0062TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0062TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0062TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0063TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0063TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0064TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0064TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0064TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0064TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0070TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0070TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0070TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0070TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0071TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0071TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0072TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0072TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0072TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0072TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0000TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0000TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0000TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0000TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0001TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0001TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0001TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0001TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0002TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0002TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0002TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0002TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0003TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0003TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0004TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0004TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0004TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0004TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0021TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0021TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD0030TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD0030TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1001TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1001TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1002TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1002TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1003TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1003TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1005TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1005TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1006TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1006TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1006TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1006TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1007TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1007TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1007TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1007TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1008TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1008TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1008TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1008TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1009TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1009TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1009TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1009TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1010NR. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1010NR, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1010TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1010TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1004TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1004TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1004TX. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1004TX, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1005TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1005TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A replacement glass touch digitizer compatible with the HP Pavilion x360 14-CD1011TU. The digitizer is the outer touch layer only — the right repair when the glass is cracked or touch has failed but the picture underneath is still perfect. Is the digitizer the part you need? Cracked glass, perfect picture — the digitizer (this part) is all you need. Damaged image — lines, dark blotches or a dead region mean the LCD underneath is damaged too. You will need the LCD as well, or a complete assembly where your model is sold that way. Touch dead, glass intact — usually the digitizer or its cable. If you can, reseat the cable before ordering. Before you order Specifications — compare the screen size and the connection type with your original; glass shape and cable position can change between revisions of the same series. Variations — where the listing offers the digitizer with or without a frame, the framed option arrives pre-mounted, which makes fitting easier and keeps the alignment true. Choose the variation that suits your repair. Images — check the photos for the outline of the glass, the camera and sensor cut-outs and where the flex cable exits, and compare them with your machine. Not certain? — send us a photo of your screen and your HP 14-CD1011TU, and we will tell you which part is compatible. Fitting Digitizer replacement is an adhesive job: the old glass releases with gentle, even heat, the surround is cleaned back, and the new digitizer goes down on fresh adhesive. It rewards patience and a dust-free bench — and if that is not your idea of fun, any phone or laptop repairer can do it quickly. Quality and packaging Digitizers are inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Part: Touch digitizer

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1036TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1036TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1037TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1037TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1038TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1038TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1042TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1042TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1043TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1043TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1044TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1044TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1045TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1045TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1047TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1047TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1049TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1049TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1050TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1050TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1051TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1051TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1053TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1053TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1054TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1054TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1055TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1055TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1056TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1056TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1057TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1057TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1058TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1058TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD1060TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD1060TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP PAVILION X360 14-CD L20553-001: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 14-CD L20553-001, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP PAVILION X360 14-CD L20556-001: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 14-CD L20556-001, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP PAVILION X360 14-CD L20559-001: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 14-CD L20559-001, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP PAVILION X360 14-CD: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 14-CD, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: In Stock

A complete touch screen assembly compatible with the HP PAVILION X360 14-CD0005DX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 14-CD0005DX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP PAVILION X360 14-CD0011CA: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 14-CD0011CA, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP PAVILION X360 14-CD0505SA: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 14-CD0505SA, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP PAVILION X360 14-CD0520SA: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 14-CD0520SA, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP PAVILION X360 14-CD0522SA: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP X360 14-CD0522SA, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0000: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0000, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0000TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0000TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0001TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0001TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0002TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0002TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0003TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0003TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0004TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0004TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0005TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0005TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0006TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0006TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0007CA: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0007CA, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0007TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0007TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0008TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0008TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0010TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0010TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0011NR: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0011NR, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0011TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0011TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0012TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0012TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0014TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0014TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0015TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0015TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0015TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0015TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0016TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0016TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0018TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0018TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0019TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0019TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0020TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0020TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0021TX: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0021TX, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock

A complete touch screen assembly compatible with the HP Pavilion x360 14-CD0022TU: the LCD panel and the glass touch digitizer supplied as one factory-bonded unit. Where the title mentions a frame or bezel, the assembly ships pre-mounted in it. Why replace the whole assembly? On touch laptops the glass is bonded to the LCD under pressure at the factory. Prising cracked glass off an intact LCD is slow, risky work that often destroys the panel underneath — which is why repairers fit the bonded assembly instead. One part, one swap, and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch lids, in more than one resolution and often in more than one bezel style, so please compare this assembly with your machine: Specifications — confirm your machine is the touch version, then compare the resolution, refresh rate and connectors with your original before ordering. Variations — where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images — compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? — send us a photo of your lid and the code on the rear of the original panel, along with your HP 14-CD0022TU, and we will confirm compatibility. Fitting An assembly swap is usually easier than a bare-panel swap: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Stock: Out of Stock