HP 15T-CS100 CTO parts

Eighth-generation Intel hardware in a 15.6-inch consumer chassis, the HP Pavilion 15t-cs series was HP's build-to-order mainstream laptop from about 2018, with the near-identical Pavilion 15-cs sold alongside it in retail. Screens are the main thing to get right here: these machines shipped with either 1366x768 or 1920x1080 panels and in touch and non-touch form, so a replacement has to match the original spec. Parts carried for the Pavilion 15t-cs family go well beyond displays, taking in batteries, keyboards, palmrests and top covers, hinges, display cables and charging ports, and the model table on this page shows what suits each variant. Parts can be collected from the workshop in Maidstone, Melbourne, or the laptop left there for repair.

Showing parts for the HP 15T-CS100 CTO. All HP PAVILION 15T-CS models

HP PAVILION 15T-CS models

All HP families

1. Pick your exact model to narrow the parts below to it.

Your model: 15T-CS100 CTO

15 models in this family

Model	Also known as
15T-CS SERIES	—
15T-CS000	3AJ01AV, 3AJ04AV, 3AJ05AAR, 3AJ05AV, 3AJ09AAR, 3AJ09AV, 3AJ10AV, 3AJ12AV, 3AJ13AV
15T-CS000 CTO	3AJ01AV, 3AJ04AV, 3AJ05AAR, 3AJ05AV, 3AJ09AAR, 3AJ09AV, 3AJ10AV, 3AJ12AV, 3AJ13AV
15T-CS100	5LF71AV, 5LF72AV
15T-CS100 CTO	—
15T-CS200	5NL13AV, 5NL14AV, 5NL15AV, 5NX98AV, 5NY00AV, 5NY01AV
15T-CS200 CTO	—
PAVILION 15T-CS000	—
PAVILION 15T-CS000	—
PAVILION 15T-CS100	—
PAVILION 15T-CS100	—
PAVILION 15T-CS200	—
PAVILION 15T-CS200	—
PAVILION 15T-CS300	—
PAVILION 15T-CS300	—

2. Choose your required part type

Touch laptop screen1

Can't find your part? Contact us

Touch laptop screen for HP 15T-CS100 CTO1

HP Pavilion 15T-CS100 CTO touch screen

A replacement touch screen compatible with the HP PAVILION 15T-CS100 CTO, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP 15T-CS100 CTO and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$205.00