MSI VENTURE A14 A3HM SERIES parts

The A14 label groups 15 closely related MSI laptops, and as MSI reuses short chassis codes across different years and product lines, the full model number on the underside sticker is the detail to match before ordering. Screens and touch screen assemblies are carried for the family, alongside batteries, keyboards, palmrests and top covers, hinges, display cables, fans and charging ports. Panel sizes, resolutions and connectors can differ between A14 variants, so confirming the exact code against the list on this page avoids a wrong part and a return. The model table below shows every variant in the family and the parts that suit each one. Parts can be picked up from the Maidstone workshop in Melbourne, or the laptop can be left there for repair.

Showing parts for the MSI VENTURE A14 A3HM SERIES. All MSI A14 models

MSI A14 models

All MSI families

1. Pick your exact model to narrow the parts below to it.

Your model: VENTURE A14 A3HM SERIES

15 models in this family

Model	Also known as
MODERN A14 F2HM SERIES	—
MODERN A14 F2HMG	—
MODERN A14 F2HMG-002AU	—
MODERN A14 F2HMG-005ID	—
MODERN A14 F2HMG-006ID	—
MODERN A14 F2HMG-009XES	—
MODERN A14 F2HMG-010XES	—
MODERN A14 F2HMG-6529JP	—
MODERN A14 F3HM SERIES	—
MODERN A14 F3HMG	—
MODERN A14 F3HMG-004XRU	—
MODERN A14 F3HMG-025MY	—
VENTURE A14 A3HM SERIES	—
VENTURE A14 A3HMTG	—
VENTURE A14 A3HMTG-019US	—

2. Choose your required part type

Touch laptop screen1

Can't find your part? Contact us

Touch laptop screen for MSI VENTURE A14 A3HM SERIES1

MSI VENTURE A14 A3HM SERIES touch screen

A replacement touch screen compatible with the MSI Other VENTURE A14 A3HM SERIES, in the 14.0" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your MSI VENTURE A14 A3HM SERIES and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Touch_type: Embedded Touch

Stock: In Stock

A$215.00