HP laptop screens & parts

A replacement touch screen compatible with the HP Other PAVILION 15-AW070CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-AW070CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CC100 SERIES, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CC100 SERIES and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CC510NR, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CC510NR and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CC563NR, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CC563NR and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CC564NR, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CC564NR and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CD000 SERIES, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CD000 SERIES and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CD001CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CD001CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CD002AX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CD002AX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CD002CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CD002CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CD003CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CD003CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CD004CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CD004CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CD007CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CD007CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CD013AU, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CD013AU and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A replacement touch screen compatible with the HP Other PAVILION 15-CD014AU, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CD014AU and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0019TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0019TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0019TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0019TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0020NA. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0020NA, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0020TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0020TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0021TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0021TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0022TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0022TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0022TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0022TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0023TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0023TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0023TX. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0023TX, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock

A complete touch screen assembly compatible with the HP Other PAVILION X360 14-DH0024TU. The LCD screen and the touch glass digitizer are supplied as one sealed unit unit, in the 14.0" size class. Frame, bezel, circuit board may be included if pictured or described. Why replace the whole assembly? On touch laptops the touch glass is usually stuck to the LCD by the manufacturer. Removing cracked glass off an unbroken LCD is slow, risky work may damage the LCD panel - which is why repairers fit the assembly instead. One part and both the picture and the touch layer are new. Before you order Manufacturers sell the same model with touch and non-touch versions, in different resolutions, refresh rates and often in more than one bezel style, so please compare this assembly with your laptop: Specifications : confirm your machine is the touch version, then compare the resolution, refresh rate and connectors (30pin (eDP) + Touch Connector) with your original before ordering. Variations : where the listing offers options such as with or without frame, or different bezel colours, choose the variation that suits your lid; the frame is not interchangeable between revisions. Images : compare the photos with your machine's bezel shape, hinge covers and camera cut-out; these details change between revisions of the same series. Want a second opinion? : send us a photo of your lid and the code on the rear of the original panel, along with your HP PAVILION X360 14-DH0024TU, and we will confirm compatibility. Fitting An assembly swap is usually easier disasemmbling individual parts: remove the damaged assembly, transfer the cables, and mount the new unit. Take care with the display and touch connectors, keep screws sorted by length, and support the assembly by its edges while you work. If the frame is included, the whole front of the lid comes across in one piece. Quality and packaging Assemblies are sourced from established manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Warranty, returns and delivery Warranty: 12 months Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 14.0", Connector: 30pin (eDP) + Touch Connector, Surface: Glossy, Warranty: 12 months

Stock: In Stock