logo

HP laptop screens & parts

Replacement screens, batteries, keyboards, covers and internal parts for HP laptops. Start from your model family below, or browse every HP part.

HP model families

846 families

Shop HP parts by type

All HP parts85,113

Filter & sort
HP OMNIBOOK 3 15-FN0105DX touch screen

HP OMNIBOOK 3 15-FN0105DX touch screen

A replacement touch screen compatible with the HP Other OMNIBOOK 3 15-FN0105DX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP OMNIBOOK 3 15-FN0105DX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP OMNIBOOK 3 15-FN0505NR touch screen

HP OMNIBOOK 3 15-FN0505NR touch screen

A replacement touch screen compatible with the HP Other OMNIBOOK 3 15-FN0505NR, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP OMNIBOOK 3 15-FN0505NR and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP OMNIBOOK 3 15-FN0506NR touch screen

HP OMNIBOOK 3 15-FN0506NR touch screen

A replacement touch screen compatible with the HP Other OMNIBOOK 3 15-FN0506NR, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP OMNIBOOK 3 15-FN0506NR and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP OMNIBOOK 3 15-FN0XXX touch screen

HP OMNIBOOK 3 15-FN0XXX touch screen

A replacement touch screen compatible with the HP Other OMNIBOOK 3 15-FN0XXX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP OMNIBOOK 3 15-FN0XXX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP OMNIBOOK 3 15Z-FN000 touch screen

HP OMNIBOOK 3 15Z-FN000 touch screen

A replacement touch screen compatible with the HP Other OMNIBOOK 3 15Z-FN000, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP OMNIBOOK 3 15Z-FN000 and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0000 SERIES touch screen

HP PAVILION 15-CS0000 SERIES touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0000 SERIES, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0000 SERIES and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0003CA touch screen

HP PAVILION 15-CS0003CA touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0003CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0003CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0008CA touch screen

HP PAVILION 15-CS0008CA touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0008CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0008CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0008TU touch screen

HP PAVILION 15-CS0008TU touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0008TU, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0008TU and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0009TU touch screen

HP PAVILION 15-CS0009TU touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0009TU, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0009TU and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0010TU touch screen

HP PAVILION 15-CS0010TU touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0010TU, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0010TU and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0010TX touch screen

HP PAVILION 15-CS0010TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0010TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0010TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0015TX touch screen

HP PAVILION 15-CS0015TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0015TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0015TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0020TX touch screen

HP PAVILION 15-CS0020TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0020TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0020TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0021TX touch screen

HP PAVILION 15-CS0021TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0021TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0021TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0022TX touch screen

HP PAVILION 15-CS0022TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0022TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0022TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0023TX touch screen

HP PAVILION 15-CS0023TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0023TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0023TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS0024TX touch screen

HP PAVILION 15-CS0024TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS0024TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS0024TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS1107TX touch screen

HP PAVILION 15-CS1107TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS1107TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS1107TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS2000 SERIES touch screen

HP PAVILION 15-CS2000 SERIES touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS2000 SERIES, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS2000 SERIES and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS2003CA touch screen

HP PAVILION 15-CS2003CA touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS2003CA, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS2003CA and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS2008TU touch screen

HP PAVILION 15-CS2008TU touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS2008TU, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS2008TU and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS2028TX touch screen

HP PAVILION 15-CS2028TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS2028TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS2028TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00
HP PAVILION 15-CS2029TX touch screen

HP PAVILION 15-CS2029TX touch screen

A replacement touch screen compatible with the HP Other PAVILION 15-CS2029TX, in the 15.6" size class, built with the touch sensor embedded in the LCD cell itself. There is no separate glass digitizer: this panel is the complete touch surface for laptops built with an embedded (in-cell) touch design. Before you order Touch laptops are built two ways, and the parts are not interchangeable, so please check the following against your machine: Touch construction — if your original is a bare panel with no glass bonded over the front, an embedded-touch screen like this one is the compatible type. If your machine has edge-to-edge glass glued over the LCD, you need a touch screen assembly instead. Specifications — compare the resolution, refresh rate and connector. The touch signal travels through the main screen cable, so the pin count and socket position must line up with your original. Variations and images — if the listing offers more than one option, pick the variation whose specifications suit your machine, and use the photos to check connector position and mounting points before you commit. Unsure which panel you have? — the code printed on the rear of your original panel settles it. Send it to us with your HP PAVILION 15-CS2029TX and we will check compatibility for you. Quality and packaging Panels are sourced from established LCD manufacturers, inspected before dispatch and shipped in rigid, foam-lined packaging designed for glass. Where a compatible-grade panel is supplied, it meets or exceeds the specification of the part it replaces; the panel maker can vary with stock. Fitting Fitting follows the same steps as a standard screen swap — unclip the bezel, unscrew the old panel, transfer the cable — with one extra caution: the connector also carries the touch signal, so seat it fully and squarely before first power-on. If touch does not respond after the swap, reseat the cable before assuming a fault. Warranty, returns and delivery Delivery: shipped Australia-wide with tracking. Returns: if a part arrives faulty or turns out not to be compatible with your machine, contact us first and we will make it right under our returns policy.

Size: 15.6"

Stock: In Stock

A$215.00